Embedded GUI Products

Embedded GUI Engine

Sege (Serial Embedded GUI Engine) board family provides a Plug-and-Play Graphical User interface solution for embedded systems. it just needs to be attached to a simple display interface board and the human interface is ready for production.

SegeNT

Hardware Features
  • Universal Driver for  TFT Displays.
  • Supports Displays up to WVGA (800X480) pixel resolution @ 16BPP color depth
  • Powerful 32-bit processor running at 80MHZ on board
  • Powerful graphic controller with 1024KB RAM on board
  • Powerful resistive touch screen on board
  • Dedicated I2C bus for driving external Capacitive Touch Screen controller.
  • 16Mbyte Flash memory for bitmaps, fonts and objects storage
  • Mono Audio output
  • 7-bit, 100K (128 levels) Digital Pot for software brightness control
  • CMOS (3.3V) RS232 and RS485/RS422 up to 115.2kb/sec serial interface
  • Micro SD card with up to 2GB capacity (FAT16).
  • 64Kbyte flash memory for user application.
  • 3 Independent Graphic Layers (PIP) with Alpha blending and transparency
  • 8 General purpose digital Input / Output
  • 8 Analog Input with 10-bit resolution
  • 2 PWM Output
  • Single Power supply operation (3.3V)
  • Small size 3”X 2”
  • Low Cost
  • ROHS Compliant
Software Features
  • Powerful set of GUI Objects, including: Form, Button, BarGraph, Chart, NumberBox, TextBox, PictureBox, Slider, Needle and Shape.
  • FREE Embedded GUI Design software (uiLAB).
  • Advanced Object Oriented Architecture enables low cost MCU as system host using simple serial interface.
  • True color or 16 bit per pixel (bpp) color depth.
  • Three independent graphic layers (Screen, Window1 and Window2) support.
  • Programmable Touch Events Interrupt (NotifyHost).
  • Up to 64 Screen/Window.
  • Up to 64 Object per screen/window.
  • Alpha blending and transparency support.
  • Window’s Bitmap support with rotation and mirror.
  • Anti-Aliased (2bpp) and normal (1bpp) fonts support.
  • GUI project can be programmed directly from the SD card.
  • Serial commands to program the GUI directly from the Host controller.
  • Object and Terminal serial commands.
  • Built-in Sound Generator.
  • User defined Audio Play Back files.
  • Resistive and Capacitive touch screen support.
  • Back light brightness control.
  • Simple UART (TTL RS232) serial interface.
  • No missing touch events!
  • Fast graphic rendering.

Embedded TFT TouchScreen Modules

Production ready and Fully integrated Embedded TFT display modules with Capacitive or Resistive Touch Screen. DigiZap display modules are drop-in solution that allow customers to implement Graphical User Interface with Smart Phones-like graphics and feel at record time to market.

 Embedded 4.3" WQVGA Display Module With Resistive or Capacitive Touch Screen

 

 

  • Powered by SegeNT
  • Full support by uiLab
  • Simple RS232 CMOS serial interface
  • Newhaven NHD-4.3-480272EF-ATXL TFT Display
  • 4.3" Diagonal, 95X53.83 mm active area
  • 480(H) X 272(V) Resolution, RGB 65K true to life colors
  • 4-wire Resistive or Capacitive Touch Screen
  • High Brightness LED backlight
  • Audio Amplifier on board
  • 5VDC or 3.3VDC Input Voltage
  • Constant current LED backlight driver on board
  • 124(W) X 68(L) mm module size

MORE INFO >>

Embedded 5.0" WVGA Display Module With Resistive Or Capacitive Touch Screen

 

  • Powered by SegeNT
  • Full support by uiLab
  • Simple RS232 CMOS serial interface
  • Newhaven NHD-5.0-800480EF-ATXL#-T TFT Display
  • 5.0" Diagonal, 108X64.8 mm active area
  • 800(H) X 480(V) Resolution, RGB 65K true to life colors
  • 4-wire Resistive or Capacitive Touch Screen
  • High Brightness LED backlight
  • Audio Amplifier on board
  • 5VDC or 3.3VDC Input Voltage
  • Constant current LED backlight driver on board
  • 133(W) X 78(L) mm module size

MORE INFO >>

Embedded 7.0" WVGA Display Module With Resistive or Capacitive Touch Screen

 

  • Powered by SegeNT
  • Full support by uiLab
  • Simple RS232 CMOS serial interface
  • Newhaven NHD-7.0-800480EF-ATXV#-T TFT Display
  • 7.0" Diagonal, 154.08X85.92 mm active area
  • 800(H) X 480(V) Resolution, RGB 65K true to life colors
  • 4-wire Resistive or Capacitive Touch Screen
  • High Brightness LED backlight
  • Audio Amplifier on board
  • 5VDC or 3.3VDC Input Voltage
  • Constant current LED backlight driver on board
  • 182(W) X 105(L) mm module size

MORE INFO >>

Embedded 5.7" VGA Display Module With Resistive Touch Screen

 

  • Powered by SegeNT
  • Full support by uiLab
  • Simple RS232 CMOS serial interface
  • Hantronix HDA570VT-G TFT Display
  • 5.7" Diagonal, 115.2X86.4 mm active area
  • 640(H) X 480(V) Resolution, RGB 65K true to life colors
  • 4-wire Resistive Touch Screen
  • High Brightness LED backlight
  • Audio Amplifier on board
  • 5VDC or 3.3VDC Input Voltage
  • Constant current LED backlight driver on board
  • 160(W) X 105(L) mm module size

MORE INFO >>

Embedded 10.4" VGA Display Module With Resistive Touch Screen

 

 

  • Powered by SegeNT
  • Full support by uiLab
  • Simple RS232 CMOS serial interface
  • NEC NL6448BC33 TFT Display
  • 10.4" Diagonal, 211X158 mm active area
  • 640(H) X 480(V) Resolution, RGB 65K true to life colors
  • 4-wire Resistive Touch Screen
  • High Brightness LED backlight
  • Audio Amplifier on board
  • 5VDC or 3.3VDC Input Voltage
  • Constant current LED backlight driver on board
  • 243(W) X 185(L) mm module size

Embedded GUI Design Software

uiLAB

Build a SmartPhone-Like GUI faster, with drag-and-drop simplicity, using Haidar Technology uiLab Visual GUI Builder

                                                                                     

Features:
  • No license! No production fees! No third party library!
  • FREE full version download (Not a Demo!)
  • True WYS|WYG visual GUI tool
  • Simple drag-and-drop GUI tool
  • Full support for SegeNT
  • Anti-aliasing Font support.
  • Support for 3 graphic layers
  • Up to 64 forms per project
  • Up to 64 object for each form
  • Compile the whole project into a Hex file
  • Utility to program the GUI project through the serial interface
  • Alignment Tools (Left, Right, Top, Bottom or Center)
  • Select box (move the selected objects at the same time)
  • Snap to Grid tool Move and Resize Tools
  • Powerful predefined set of objects
  • Real time object properties simulation
  • Font converter utility
  • Generate project report
  • Copy and Paste tools
  • Export screen as a bitmap
  • Terminal commands utility TouchScreen, Backlight, Digital I/O, PWM, Analog Inputs, Beep utilities
  • PC Playback allows the user to view and interact with the production-ready GUI in the native resolution on the PC before programming the LCD. Easy compile feature allows the embedded designer to view the GUI design, at any stage of development, on the LCD module in minutes. This process virtually eliminates the simulation phase that is standard in other products.
System requirements
  • Intel Pentium or compatible processor
  • High resolution 17” LCD monitor or higher
  • Windows XP, Windows Vista or Windows 7
  • 512 MB RAM or higher
  • USB or RS232 Port

Download uiLab V1.13

 

Embedded GUI Evaluation Boards

DigiZap Embedded GUI evaluation boards are the easiest and fastest way to evaluate our embedded GUI products. Whether you need to test color LCD, or evaluate your embedded GUI in real time, DigiZap GUI evaluation boards can help you achieving that in a very short time!

EVL-CL4-H

EVL-CL4-H (With Host Controller) is the simplest and fastest way to add a feel to your GUI. It is based on Microchip PIC32MX360F512 microcontroller. EVL-CL4-H is ready to use with any of our Embedded TouchScreen Display Modules. The micro is already programmed with everything you need to start your evaluation.

Rapid Prototyping

Whether you need to show your marketing team, or preview your future product to customers, EVL-CL4-H can help you deliver a look-and-feel prototype in a very short time!

Hardware

EVL-CL4_H is based on PIC32MX360F512 running at 80MHZ. It can be programmed using any of Microchip In-Circuit Programmers & Debuggers like MPLAB ICD3. It can be used with any of our color display modules or embedded GUI boards.

Firmware

The firmware is written in C and is compatible with Microchip MPLAB IDE and PIC32 compiler. The firmware includes: UART, GUI commands, Terminal commands, interrupt driven UI handler, Macros, and sample code for VGADemo_CA32 Project.

Sample GUI

A sample GUI project (VGADemo_CA32.pjt) is also included to show the many powerful features of our GUI objects and how to interact with them in real time.

Features
  • On board PIC32MX360F512 Microchip microcontroller (32bit @ 80MHZ)
  • On board Real Time Clock
  • On board RGB LED
  • On board 4 user buttons
  • On board 4 user digital outputs
  • On board 4 user digital inputs
  • On board 5 user LEDs
  • On board 5 user analog inputs
  • On board 1 user 10K POT

 

GUI Starter Kits

Our Embedded GUI starter kits include everything you need to start designing great looking and intuitive embedded GUI fast and easy!

 

Starter Kit include:
  • Embedded Display Module (SNT-xxxx-xx)
  • EVL-CL4-H board
  • 5VDC Power Supply
  • USB Cable
  • 16pin Flat Cable
  • 1W Speaker
Ordering Information:
Part Number                Description  Price
EVK-SegeNT Evaluation Kit for SegeNT  $320
STK-SNT-N480272-43-RT Starter kit for SNT-N480272-43-RT Embedded Display Module  $320
STK-SNT-N480272-43-CT  Starter kit for SNT-N480272-43-CT Embedded Display Module  $340
STK-SNT-N800480-50-RT Starter kit for SNT-N800480-50-RT Embedded Display Module  $340
STK-SNT-N800480-50-CT Starter kit for SNT-N800480-50-CT Embedded Display Module  $360
STK-SNT-N800480-70-RT  Starter kit for SNT-N800480-70-RT Embedded Display Module  $380
 STK-SNT-N800480-70-CT  Starter kit for SNT-N800480-70-CT Embedded Display Module  $410
STK-SNT-H640480-57-RT  Starter kit for SNT-H640480-57-RT Embedded Display Module  $420
STK-SNT-E640480-104-RT Starter kit for SNT-E640480-104-RT Embedded Display Module  $770